![background image](http://html.mh-extra.com/html/husqvarna/500/500_service-manual_171793023.webp)
22
23
104 72 57-26
104 72 57-26
19. Lower thread tension
(thread tension of the bobbin case)
Check
1. Insert a full bobbin into the bobbin case.
2. The thread tension spring of the bobbin case shall give a resistance of 12 - 20 g when
pulling the thread slowly.
Adjustment
1. Turn screw (A) until the correct thread tension is obtained.
NOTE !
Before any adjustment is made remove any loose pieces of thread or fluff from
the thread tension discs