16
7. Operation
4. Use a slow, deliberate action to cut heavy growth.
The rate of cutting motion will depend on the material
being cut. Heavy growth will require slower action
than will light growth.
5. Never swing the unit so hard as you are in danger of
losing your balance or control of the unit.
6. Try to control the cutting motion with the hip rather
than placing the full workload on the arm and hands.
7. Take precautions to avoid wire, grass and dead, dry,
long-stem weeds from wrapping around the head
shaft. Such materials can stall the head and cause
the clutch to slip, resulting in damage to the clutch
system if repeated frequently.
ADJUSTING THE LINE LENGTH
• Your brushcutter is equipped with a semi- auto type
nylon line head that allows the operator to advance
the line without stopping the engine. When the line
becomes short, lightly tap the head on the ground
while running the engine at full throttle.
• Each time the head is bumped, the line advance
about 1 inch (25.4 mm). For better effect, tap the
head on bear ground or hard soil. Avoid bumping in
thick, tall grass as the engine may stall by overload.
Summary of Contents for 532RBS
Page 22: ......
Page 23: ......
Page 24: ...Original instructions 2010 11 01 1153989 26 www husqvarna com ...
