Husqvarna 532RBS, Operator'S Manual

20

blade, and keep the machine in a safe place away
from heat and humidity.

(1) Tank cap
(2) Fuel tank

The engine revolution speed increases when you turn
the idling adjustment screw clockwise, and decreases
when you turn it counterclockwise.

Standard idling revolution speed: 

2,300 to 2,700 rpm

(1) Idling adjustment

screw

(2) Rotation increases.
(3) Rotation decreases.

MAINTENANCE BEFORE LONG-TERM STORAGE

This machine is highly inflammable.

•

When you take fuel out, keep the fuel tank well
away from flames.

•

Be careful not to spill the fuel, and completely
wipe off all fuel spills.

•

If you will not use the machine for a long time (two
months or more), take out the fuel from the fuel tank
and carburetor. If you leave the fuel tank and
carburetor filled with fuel for a long time, the fuel
might deteriorate and clog the inside of the
carburetor, thus causing engine problems (such as
wrong start or insufficient output).

•

When storing the machine for a long time, loosen the
cap of the fuel tank slightly. Excessive tightening of
the cap might deform its packing over time.

1. Brush off dirt from the machine, and check the

damage or slack of each part. If you find any
abnormal part, repair it completely ready for the next
time the machine is used.

2. Extract fuel from the fuel tank, switch on the engine,

and leave it running until it stops naturally.

3. Remove the spark plug, and pour 1 to 2 ml of 2-cycle

oil into the engine. Draw the starter rope two to three
times, set the plug back, and stop it at the contraction
position.

4. Supply some grease to the gear case, and apply anti-

rust oil to the metal parts such as the throttle wire.

5. Apply a little oil to the blade, put the cover on the

IMPORTANT

WARNING

8. Maintenance

MA11

MA12