maIntenanCe
15
Maintenance Schedule
the following list of maintenance procedures must be performed on the machine. for those points not described
in the manual, visit an authorized service workshop. With daily use, the machine should be lubricated twice
weekly.
WARNING!
No service operations may be performed on the engine or unit unless:
The engine is stopped.
•
The ignition cable has been removed from the spark plug.
•
The machine is securely parked where it will not tip or begin rolling.
•
Maintenance
Daily
before
starting
1/25
3/50
6/10
12/300
check the engine oil level
l
replace engine oil
1)
l
check the air filter
l
clean the air filter
2)
l
replace air filter cartridge
2)
n
clean sludge reservoir for fuel system
n
check and clean the spark plug
l
replace the spark plug
l
check idle speed
n
check and adjust play in valves
3)
u
clean fuel tank
3)
u
check, replace fuel lines as necessary
3, 4)
u
check throttle cable
u
check decals and warning signs
u
check wear and tension on the chain
n
check the chassis, bolts and set screws
u
lubrication; see the lubrication schedule
Maintenance interval - hours
1)
first change after 20 hours.
2)
In dusty conditions maintenance is required at shorter intervals.
3)
Performed by authorized service workshop.
4)
Performed every second year.
n
described in this manual
u
not described in this manual
l
See the engine manufacturer's owner's manual
Summary of Contents for 966997301
