9
6003-004
Mow up and down, not side-to-side.
Driving on Slopes
SAFETY INSTRUCTIONS
Driving on slopes is one of the operations where
the risk is greatest that the driver will lose control
or the machine will tip over, which can result in
serious injury or death. All slopes require extra
caution. If you cannot reverse up a slope or if feel
unsure, do not mow the slope.
Do as follows:
•
Remove obstacles such as stones, tree
branches, etc.
•
Mow up and down, not side-to-side.
•
Never drive the rider on terrain that slopes
more than 10°.
•
Avoid starting or stopping on a slope, If the
tires begin to slip, shut down the blades and
drive slowly down the slope.
•
Always drive evenly and slowly on slopes.
•
Make no sudden changes in speed or direc-
tion.
•
Avoid unnecessary turns on slopes, and if it
proves necessary, turn slowly and gradually
downward, if possible.
•
Watch out for and avoid driving over furrows,
holes, and bumps. On uneven terrain, the
machine can tip more easily. Long grass can
hide obstacles.
•
Drive slowly. Use small movements of the
steering controls.
•
Be extra cautious with any additional equip-
ment, which can alter the machine’s stability.
•
Do not mow near verges, ditches, or banks.
The machine can suddenly spin around if a
wheel goes over the edge of a drop or ditch,
or if an edge gives way.
•
Do not mow wet grass. It is slippery, and the
tires can lose their grip, so that the machine
slides.
•
Try not to stabilize the machine by putting a
foot on the ground.
•
When cleaning the chassis, the machine may
never be driven near verges or ditches.
8011-519
Be extra cautious when driving on slopes.
•
Avoid starting or stopping on a slope. If tires
lose traction, disengage the blades and pro-
ceed slowly straight down the slope.
•
If machine stops while going uphill, disengage
blades and back down slowly.
•
Do not turn on slopes unless necessary, and
then, turn slowly and gradually downhill, if pos-
sible.
Summary of Contents for 968999207 / iZ5223KAA
Page 2: ...2 2004 Husqvarna All right reserved Beatrice NE Printed U S A ...
Page 28: ...28 WIRING DIAGRAMS ...
Page 29: ...29 WIRING DIAGRAMS ...
Page 30: ......