![background image](http://html.mh-extra.com/html/husqvarna/ar19/ar19_operators-manual_173138045.webp)
English – 43
Assembly – Initial start-up
Applies to model AR19.
1.
Use eye protection. Remove the wooden blocks.
2.
Carefully cut along the side of the box.
3.
The lawn aerator is delivered with the handle
collapsed. First lift the rear wheel control (4) and
then fold the collapsible handle (3) into working
position. Lock using the cam lock (6).
4.
Fill the engine (1) with the manufacturer-
recommended oil. See the chapter ”Lubrication/
Engine oil”.
Fill the reduction gear (2) with the manufacturer-
recommended oil. See the chapter ”Lubrication/
Oil change in reduction gear”. The machine
must be parked on level ground when inspecting
and filling oil.
5.
Place the weights (7) in their holders on each
side of the machine.
6.
Make sure that the clutch handle releases
properly and that the clutch cable slides easily.
IMPORTANT INFORMATION
Be careful for nails and slivers.
ASSEMBLY INSTRUCTIONS
8011-105
Summary of Contents for AR19
