A
D
F
B
C
E
Note:
Walk 2-3 m / 6.5-9.8 ft. behind the product
when you operate the product with appDrive.
To make a work area
Minimum 3 waypoints are necessary to make a work
area.
•
Operate the product clockwise around the
boundary of the work area.
•
Add waypoints on the map. Add the waypoints
minimum 3 cm / 1 in. from obstacles.
•
Add a waypoint to make the product cut the grass
at the edge between the lawn and the stone path.
Make sure that you straddel the edge of the lawn
and the stone path when you add a waypoint. The
product can straddel the edge if the height of the
stone path is maximum 1 cm / 0.4 in. in relation to
the lawn.
•
max 1 cm / 0.4”
•
Add the waypoint at the outer corner to install the
virtual boundary around a corner.
•
Do not set waypoints that make a virtual boundary
go across itself in the same work area.
•
Save the work area to automatically connect the
first and last waypoint with a virtual boundary.
1
2
3
4
5
6
7
8
To make a stay-out zone
Minimum 3 waypoints are necessary to make a stay-out
zone.
1970 - 001 - 10.10.2022
Installation - 17
