Transportation, storage and disposal
Transportation
WARNING: Be careful during transportation.
The product is heavy and can cause injury if
it falls.
• BE 20: Before transportation, disconnect the power
cord from the power supply.
• BE 30: During transportation, keep the fuel valve
closed and keep the engine in a vertical position to
prevent fuel leakage.
To lift the product
WARNING: Make sure that the lifting
equipment has the correct specification to lift
the product safely. The rating plate on the
product shows the product weight.
WARNING: Do not lift a damaged product.
Make sure that the lifting eyes are correctly
installed and not damaged.
WARNING: Do not walk or stay below or
near a lifted product.
• Lift the product manually at the handles (A).
A
A
• If you use lifting equipment, attach the lifting
equipment to the lifting eyes.
WARNING: Do not use metal hooks,
chains or other lifting equipment with
rough edges that can cause damage to
the lifting eye.
Storage
• Clean the product before storage.
• Keep the product in a dry and frost-free area.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Remove all fuel from the fuel tank before you put the
product in storage for a long period of time. Discard
the fuel at an applicable disposal location. (BE 30)
• When the fuel tank is drained, start the engine. Let
the engine operate until there is no fuel remaining in
the carburetor and the engine stops. (BE 30)
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
• When the product is no longer in use, send it to a
Husqvarna dealer or discard it at a recycling
location.
Technical data
BE 20
BE 30
Voltage, V
380, 400, 440
N/A
Phases
3
N/A
Frequency, Hz
50
N/A
16
1299 - 001 - 14.04.2020
