5. Cut the floor across the ditches.
To remove a hard floor surface
WARNING:
Use protective gloves. The
blades are very sharp.
Note:
Short blades cut the floors easier than long
blades. Long blades are not always better or faster. A
short blade usually cleans the floor better than a wide
blade.
Note:
The blades are sharp for a longer time if the
work area is clean from unwanted material.
1. Use personal protective equipment. Refer to
Personal protective equipment on page 6
.
2. Install a short blade of the correct type. Refer to
select the correct blade dimension and installation
position on page 9
15
.
WARNING:
Use protective gloves.
The blades are very sharp.
3. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
blade on page 15
.
4. Cut linear ditches in the floor. Make sure that the
distance between the ditches is the same as the
width of the long blade.
5. Install a long blade of the correct type. Refer to
select the correct blade dimension and installation
position on page 9
15
.
6. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
blade on page 15
.
7. Remove the floor between the ditches.
Note:
Use a chisel and move the product in a fan
shape pattern to remove tiles and floors made of
wood.
12
1817 - 002 - 13.04.2022
