background image

12

STORAGE

When grass catcher is to be stored for a period of time, clean
it thoroughly, remove all dirt, grass, leaves, etc. Store in a
clean, dry place.

CAUTION:  Do not leave grass in bagger
containers.  Empty containers after each use
and before storing.  Failure to do so may
result in spontaneous combustion which
could develop into a fire.

TO REMOVE GRASS CATCHER

Reverse appropriate steps in 

ASSEMBLY 

section of this

manual.

CUSTOMER RESPONSIBILITIES

GENERAL RECOMMENDATIONS

Always observe safety rules when performing any mainte-
nance.

Before each use check for loose fasteners.

Clean unit thoroughly after each use.

BLADE CARE

For best results mower blades must be kept sharp.  Replace
bent or damaged blades.

See BLADE CARE instructions in your tractor owner's
manual.

CAUTION:  BEFORE PERFORMING ANY
MAINTENANCE , SERVICE OR ADJUST-
MENTS:

Depress clutch brake pedal fully and set
parking brake.

Place gearshift/motion control lever in "NEU-
TRAL" position.

Place clutch control in "DISENGAGED" po-
sition.

Turn ignition key to "OFF" position.

Make sure blades and all moving parts have
completely stopped.

Disconnect spark plug wire(s) from spark
plug(s) and place wire where it cannot come
in contact with plug.

CAUTION:  Grass catcher components are
subject to wear, damage and deteriora-
tion, which could expose moving parts or
allow objects to be thrown.  Frequently
check components and replace with
manufacturer's recommended parts, when
necessary.

Summary of Contents for CG46A
















Reviews: