![background image](http://html.mh-extra.com/html/husqvarna/er-105/er-105_operators-manual_171262012.webp)
Maintenance
Before use, each 10h
Each 2 weeks, 75h
Each 4 weeks, 100h
Examine the bearings. Replace the
bearings if they are worn or damaged.
X
Replace the bearings.
X
To clean the product
CAUTION: Do not use a high-pressure
washer to clean the product.
• Use running water from a hose to clean the product.
• Remove concrete from the surfaces of the product
after each operation before the concrete becomes
hard.
To disassemble the product
Note: This instruction is a general procedure. The
procedure is slightly different between the products.
1. Remove the bolts (A) and the washers (B).
A
B
C
2. Remove the end cover (C).
3. Remove the bolt (D) and the washer (E).
D
E
F
4. Remove the eccentric weights (F).
Note: Make a note of the positions of the eccentric
weights.
5. Remove the screws (G) and the bearing cover (H).
G
H
I
6. Remove the bearing (I).
12
1586 - 001 - 26.03.2021
Summary of Contents for ER 105
Page 109: ...1586 001 26 03 2021 109 ...
Page 110: ...110 1586 001 26 03 2021 ...
Page 111: ...1586 001 26 03 2021 111 ...