![background image](http://html.mh-extra.com/html/husqvarna/er-105/er-105_operators-manual_171262014.webp)
6. Assemble the end cover (L) with the bolts (M) and
the washers (N). Tighten the bolts to the correct
torque. Refer to
.
M
N
L
Troubleshooting
Problem
Cause
Inspection
Solution
The product
does not start.
The power cord or power plug
is defective.
N/A
Replace the power cord or
power plug.
The electrical connection in the
connection box is not correct.
Examine the electrical connec-
tion in the connection box.
Change the connection.
The product operates on 2 pha-
ses, not 3.
Examine the resistance of the 3
phases of the stator.
Replace damaged parts.
The RCD releases.
Examine the resistance of the
stator and the ground insulation
of the product.
Replace damaged parts.
The product is broken.
Examine if there is mechanical
friction or blockage in the prod-
uct.
Replace damaged parts.
14
1586 - 001 - 26.03.2021
Summary of Contents for ER 105
Page 109: ...1586 001 26 03 2021 109 ...
Page 110: ...110 1586 001 26 03 2021 ...
Page 111: ...1586 001 26 03 2021 111 ...