SERVICE WORK ON THE CHASSIS 11
81
K01087-11
–
Position the fuel tank and fit the two spoilers laterally to the
radiator.
–
Make sure that no cables or throttle cables are trapped or
damaged.
K01086-11
(All FC models)
–
Attach the fuel tank breather hose to the fuel tank lid.
–
Mount and tighten screw
1
with the rubber bushing.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
K01085-11
–
Mount and tighten screws
2
with the collar bushings.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
K01084-11
–
Plug in connector
3
for the fuel pump.
–
Remove the wash cap set. Clean the quick release cou-
pling thoroughly with compressed air.
Info
Under no circumstances should dirt enter into
the fuel line. Dirt in the fuel line clogs the injection
valve!
–
Spray silicone spray onto a lint-free cleaning cloth and
lightly lubricate the O-ring of the quick-release coupling.
Silicone spray (
–
Join quick release coupling
4
.
Info
Route the cable and fuel line at a safe distance
from the exhaust system.