SERVICE WORK ON THE CHASSIS 11
71
11.25
Mounting the seat
H02218-11
Main work
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure the seat is latched in place correctly.
V01319-10
–
Mount and tighten screw
1
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
Finishing work
–
Install the air filter box cover. (
11.26
Removing the air filter box cover
V01320-10
–
Pull off the air filter box cover sideways in areas
A
,
B
and
C
and take off toward the rear.
11.27
Installing the air filter box cover
V01321-10
(All FC models)
–
Attach catch
1
of the air filter box in area
A
and push
forward.
Info
An air filter box cover with openings for greater
airflow and a more direct response is included.
(FX 450)
–
Attach catch
1
of the air filter box in area
A
and push
forward.
