Maintenance Schedule
The following is a list of maintenance procedures that must be performed on the ride-on mower. For points not described in this
workshop manual, refer to the operator’s manual.
Maintenance
Daily maintenance
before starting
At least once
a year
Maintenance interval in hours
25
50
100
200
Cleaning
t
Check engine oil level
t
Check the engine cooling air intake
t
Check the steering wires
l
Check the brakes
l
Check the battery
t
Lubricate the drive chain, manual gearbox.
t
Check the safety system
l
Check nuts and screws
m
Check for fuel and oil leakages
m
Clean around the muffler
m
Change engine oil
1
)
l
l
Change the air filter
2
)
t
Check the cutting deck
t
Check the air pressure in the tires
t
Lubricate joints and shafts
3
)
t
Check the V-belts
l
Check and adjust the throttle cable
l
Change the fuel filter
m
Change the spark plug
t
Check the fuel hose. Change if necessary
4
)
m
1)
First change after 8 hours. When operating with a heavy load or at high ambient temperatures, change every 25 hours.
2)
Maintenance and changes are required more often in dusty conditions.
3)
The ride-on mower should be lubricated twice a week
when used on a daily basis.
4)
Performed by an authorized servicing dealer.
l
= Described in this workshop manual
m
= Not described in this workshop manual
t
= Described in the operator’s manual
WARNING! Service procedures must not be conducted on
the engine or cutting deck unless:
The engine has been stopped.
The ignition key has been removed.
The ignition cable has been removed from the spark plug.
The parking brake is engaged.
The cutting deck is disengaged.
MAINTENANCE
English
– 5
