ENGLISH - 4
H. Regular maintenance
Technical data
G. Carburettor adjustment
Your machine is fitted with a highly sensitive
low emission carburettor. We therefore recom-
mend that carburettor adjustments are only
made by an authorised servicing dealer,
equipped with instruments that will ensure
best performance with lowest emission levels.
To adjust the idle speed, however, proceed as fol-
lows:
With engine running and warm, slowly turn screw
‘I’ clockwise until the engine runs smoothly with a
consistent noise level but without making the
blade move.
If the cutting attachment does move or the engine
runs too fast, slowly turn screw ‘I’ in an anticlock-
wise direction until the correct speed is obtained.
Precise numerical engine speed settings are men-
tioned in the technical detail chart in the front of
the operator’s manual.
Warranty may be invalidated from incorrect
carburettor adjustment made by persons
other than an authorised dealer.
Every 10 work hours
1
Air filter cleaning
Never operate hedgetrimmer without the air fil-
ter, this will damage the engine.
• Remove the 2 air cleaner cover screws.
• Take off the air cleaner cover and remove air
filter from the back of the cover.
• Clean air filter in warm soapy water. DO NOT
USE PETROL.
• Allow filter to dry.
• Re-install filter.
Note: replace filter if torn or damaged.
2
Remove spark plug
• Clean and adjust electrodes setting.
Every 50 work hours
3
Change spark plug
Long storage
• Empty fuel tank and run engine dry.
Displacement (cc)
25
Bore
35
Stroke (mm)
26
Engine output din hp/kW
0.9/0.7
Engine speed at max power
8,000 - 9,000
Fuel tank capacity (cc)
370
Weight (Kg)
4.5/4.8
Sound pressure level (at the operator’s ear) LpAav (dBA) (ISO7917)
83/100dB(A)
Guaranteed noise level LwAav (dBA) (ISO 10884)
108
Measured sound power level LwAav (dBA) (ISO 10884)
106
Vibration levels recorded at the operators hand position idle/racing
4/8 m/s
2
