background image

OPERATING

English

 –

 15

Always use common sense

It is not possible to cover every conceivable situation you 
can face. Always exercise care and use your common 
sense. If you get into a situation where you feel unsafe, 
stop and seek expert advice. Contact your dealer, service 
agent or an experienced user. Do not attempt any task 
that you feel unsure of!

Work area safety

Branches, twigs, stones, etc. should be removed from 
the lawn before you start to mow.

Objects hitting against the cutting attachment could 
be thrown and cause damage to people and objects. 
Keep people and animals well away.

Never use the machine in bad weather, for instance in 
fog, in rain, damp or in wet locations, strong winds, 
intense cold, risk of lightning, etc. Working in bad 
weather is tiring and can lead to dangerous 
conditions, e.g. slippery surfaces.

Do not mow wet grass. It is slippery, and tires can lose 
their grip so that the machine skids.

Observe your surroundings to ensure that nothing can 
affect your control of the machine.

Beware of roots, stones, twigs, pits, ditches etc. Tall 
grass can hide obstacles.

Mowing slopes can be dangerous. Do not use the 
lawn mower on very steep slopes. The lawn mower 
should not be used on inclines greater than 15 
degrees.

On sloping ground you should work along the slope. It 
is much easier to work along a slope than it is to work 
up and down it.

Be careful when you are approaching hidden corners 
and objects that could block your view.

Work safety

A lawn mower is only designed to mow lawns. All 
other use is forbidden.

Always let someone know you are outside mowing.

Do not operate the mower without proper guards, 
plates, grass catcher or other safety protective 
devices in place.

Wear personal protective equipment. See instructions 
under the heading ”Personal protective equipment”.

Do not start a lawn mower unless the cutter and all 
covers are fitted correctly. Otherwise the cutter could 
come loose and cause personal injuries.

Make sure the cutter does not hit foreign objects such 
as stones, roots or the like. This can make the cutter 
dull and bend the engine shaft. A bent blade or engine 
shaft can result in an imbalance and heavy vibration, 
which results in a great risk of the blade becoming 
loose.

The brake handle must never be permanently 
anchored to the handle when the machine is running.

Place the lawn mower on firm, flat surface and start it. 
Make sure that the cutter cannot come into contact 
with the ground or other objects.

Always place yourself behind the machine. Allow all 
the wheels to remain on the ground and keep both 
hands on the handle when mowing. Keep your hands 
and feet away from the rotating blades.

Do not tilt the machine when the engine is running.

!

WARNING! This machine produces an 
electromagnetic field during operation. 
This field may under some 
circumstances interfere with active or 
passive medical implants. To reduce the 
risk of serious or fatal injury, we 
recommend persons with medical 
implants consult their physician and the 
medical implant manufacturer before 
operating this machine.

!

WARNING! The machine can be a 
dangerous tool if used incorrectly or 
carelessly, which can cause serious or 
fatal injury to the operator or others.

Never allow children or other persons 
not trained in the use of the machine to 
use or service it.

The machine should not be used by 
people with reduced physical or mental 
capacities or people who are unsuitable 
for health reasons to operate the 
machine, without supervision of a 
person responsible for their safety.

Never allow anyone else to use the 
machine without first ensuring that they 
have read and understood the contents 
of the operator’s manual.

Never use the machine if you are 
fatigued, while under the influence of 
alcohol or drugs, medication or anything 
that could affect your vision, alertness, 
coordination or judgement. 

!

WARNING! Unauthorized modifications 
and/or accessories may lead to serious 
injury or death to the user or others. 
Under no circumstances may the design 
of the machine be modified without the 
permission of the manufacturer.

Do not modify this product or use it if it 
appears to have been modified by others.

Never use a machine that is faulty. Carry 
out the safety checks, maintenance and 
service instructions described in this 
manual. Some maintenance and service 
measures must be carried out by trained 
and qualified specialists. See 
instructions under the heading 
Maintenance.

Always use genuine accessories.

Summary of Contents for LC221A





























Reviews: