Husqvarna LC221RH Operator'S Manual Download | Manualshive

Page: 17 / 28

background image

English – 17

Starting and stopping

Before starting

!

WARNING! Please read the operator’s

manual carefully and make sure you

understand the instructions before

using the machine.

Wear personal protective equipment.

See instructions under the heading

”Personal protective equipment”.

• Keep people and animals well away from the working

area.

• Perform daily maintenance. See instructions in the

section “Maintenance”.

• Ensure the ignition lead sits correctly on the spark

plug.

• Add oil if necessary. See instructions under the

heading Maintenance.

• Add gasoline. See instructions in the section "Fuel

handling".

• Disengage drive system, if so equipped, before

starting the engine (motor).

Manual Start

The engine brake handle must be held against the
handlebar when the engine is started.
• Position yourself behind the machine.
• Grip the starter handle and pull quickly. Do not allow

the starter rope to snap back.

Never wrap the starter

cord around your hand

Drive

• Self-propelling is controlled by holding the brake

handle down to the handle and pulling one or both of
the drive levers upwards toward the handle. The
further toward the handle the drive levers are pulled,
the faster the unit will travel.

• Forward motion will stop when either the the brake

handle or the drive levers are released.

• To stop forward motion without stopping the engine,

release the drive lever only. Hold the the brake handle
down against handle to continue mowing without
self-propelling.

When the drive starts feeling slow you need to adjust the
drive control cable. Finely adjust the cable using the
adjuster screw.

• Turn off the engine. Always disconnect the spark plug

before performing maintenance or accessing movable
parts.

• To tension the wire and increase speed, turn the

adjustment screw counterclockwise.

Make sure the drive control cable is not tensioned too
tight. If the lawn mower starts to drive without the clutch
lever is being operated, extend the wire.
• To extend the wire and reduce speed, screw the

adjustment screw clockwise.

OPERATING

«
...
15
16
17
18
19
...
»

Summary of Contents for LC221RH





























Reviews:

No comments

Related manuals for LC221RH

PowerMax 1200/32

Brand: Gardena Pages: 352

Brand: Gardif Pages: 21

Brand: White Outdoor Pages: 4

Brand: Grizzly Pages: 76

Brand: MTD Pages: 12

Brand: Snapper Pages: 40

Brand: Gardenline Pages: 36

Brand: Poulan Pro Pages: 32

Brand: Meec tools Pages: 38

Brand: VITO GARDEN Pages: 20

Brand: Husqvarna Pages: 10

Brand: Husqvarna Pages: 40

Brand: Husqvarna Pages: 4

Brand: Brave Pages: 24

Brand: Tar River Pages: 60

Brand: Simplicity Pages: 16

Brand: Simplicity Pages: 80

Brand: Gardena Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands