background image

6 – English

Dear customer!

Congratulations on your choice to buy a Husqvarna 
product! Husqvarna is based on a tradition that dates 
back to 1689, when the Swedish King Karl XI ordered the 
construction of a factory on the banks of the Huskvarna 
River, for production of muskets. The location was logical, 
since water power was harnessed from the Huskvarna 
River to create the water-powered plant. During over 300 
years of continuous operation, the Husqvarna factory has 
produced a lot of different products, from wood stoves to 
modern kitchen appliances, sewing machines, bicycles, 
motorcycles etc. In 1956, the first motor driven lawn 
mowers appeared, followed by chain saws in 1959, and it 
is within this area Husqvarna is working today.
Today Husqvarna is one of the leading manufacturers in 
the world of forest and garden products, with quality as 
our highest priority. We develop, manufacture and market 
high quality motor driven products for forestry and 
gardening as well as for building and construction 
industry. 
Your purchase gives you access to professional help with 
repairs and service whenever this may be necessary. If 
the retailer who sells your machine is not one of our 
authorized dealers, ask for the address of your nearest 
servicing dealer.
It is our wish that you will be satisfied with your product 
and that it will be your companion for a long time. Think of 
this operator's manual as a valuable document. By 
following its' content (using, service, maintenance etc) the 
life span and the second-hand value of the machine can 
be extended. If you ever lend or sell this machine, make 
sure that the borrower or buyer gets the operator's 
manual, so they will also know how to properly maintain 
and use it.
Thank you for using a Husqvarna product.
Husqvarna AB has a policy of continuous product 
development and therefore reserves the right to modify 
the design and appearance of products without prior 
notice.
For customer assistance, contact us at our website: 
www.husqvarna.com

Customer responsibilities

•  Read and observe the safety rules.
•  Follow the maintenance schedule in this manual. Any 

maintenance other than that described in this manual 
must be carried out by your servicing dealer (retailer).

The Lawn mower

Serial number:

Date of purchase:

The model and serial numbers will be found on a decal 
attached to the rear of the lawn mower housing. You 
should record both serial number and date of purchase 
and keep in a safe place for future reference.

Product specifications

Gasoline Capacity and 
Type

1.0 Quarts / 0.98 Liters 
(Unleaded Regular Only)

Oil Type (API SG-SL)

SAE 30 (above 0

°

C / 32

°

F) 

SAE 5W-30 (below 0

°

 / 

32

°

F)

Oil Capacity

16 Ounces

Spark Plug (Gap: 0.0295’’ / 
0.75mm)

BPR5ES

Blade Bolt Torque

35-40 ft. Ibs. (47-54 Nm)

PRESENTATION

Summary of Contents for LC221RH





























Reviews: