manualshive.com logo in svg

Husqvarna LF 100, Operator'S Manual

The Husqvarna LF 100 Operator's Manual is essential for mastering the features and functions of this exceptional product. Take advantage of our user-friendly website to easily download this manual for free, ensuring you have all the necessary instructions and information to optimize your experience with the Husqvarna LF 100.

Share
Download
background image

Technical data

Technical data, LF 75

LF 75

420 mm (16.5 in.) width

500 mm (19.6 in.) width

Net weight, kg/lb

L: 80.1/176.6

LAT: 86.6/190.9

L: 83.5/184.1

LAT: 90.3/199

Operation weight (EN500, incl. oil, ½

fuel), kg/lb

L: 81.5/179.7

LAT: 94.5/208.3

L: 84.9/187.2

LAT: 96.8/213.4

Engine brand, type

Honda, GX160

Honda, GX160

Engine power, kW/hp @rpm 

1

3.6/4.8 @3600

3.6/4.8 @3600

Vibration frequency, Hz/rpm

95/5700

95/5700

Amplitude, mm/in.

1.0/0.39

0.93/0.04

Centrifugal force, kN/lbf

14.6/3282

14.6/3282

Operation speed, m/min or ft./min

27 or 88.6

23 or 75.45

Max. tilt, degrees/%

20/36

20/36

Fuel tank capacity, l/qts

3.6/3.8

3.6/3.8

Engine oil capacity *, l/qts

0.6/0.63

0.6/0.63

Fuel consumption, l/h or qts/h

1.21 or 1.28

1.21 or 1.28

Water tank for asphalt, l/gal

13/3.4

13/3.4

Fuel *

Unleaded gasoline, max. 10% etha-

nol

Unleaded gasoline, max. 10% etha-

nol

Engine oil *

SAE 10W-30, API Class SJ

SAE 10W-30, API Class SJ

* = For further information and questions about this

specific engine, refer to the engine manual or the web

site of the engine manufacturer.

Noise and vibration emissions, LF 75

420 mm/16.5 in. width

500 mm/19.6 in. width

Sound power level, measured dB (A)

102

102

Sound power level, guaranteed L

WA

 dB (A)

2

104

104

1

As specified by the engine manufacturer. The power rating of the engine indicated is the average net output

(at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/

ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on

the final product will depend on the operating speed, environmental conditions and other values.

2

Noise emissions in the environment measured as sound power (L

WA

) as per EN ISO 3744 in conformity with

EC directive 2000/14/EC. The difference between guaranteed and measured sound power is that the guaran-

teed sound power also includes dispersion in the measurement result and the variations between different

machines of the same model according to Directive 2000/14/EC.

20

945 - 003 - 03.04.2020

To 

order 

go 

to 

Discount-Equipment.com

Summary of Contents for LF 100


































Reviews:

No comments

Related manuals for LF 100

Brands by name

Popular brands

Load more brands