General product maintenance
Before use,
each 10 h
Weekly,
each 100 h
Monthly,
each 250 h
Yearly, each
500 h
Replace the hydraulic oil.
X
Engine maintenance
Before use,
each 10 h
After the
first 20 h
Each 250 h Yearly, each
500 h
Do a check of the fuel level and the engine oil level.
X
Clean the cooling system of the engine.
O
O
O
Clean the air filter if it is necessary.
X
X
Replace the air filter.
X
X
Do a check of the water separator. Drain the water sepa-
rator if it is necessary.
X
Replace the engine oil.
X
X
X
Drain and clean the fuel tank and replace the fuel filter.
O
Adjust the valve head clearance for the air intake and the
exhaust valves.
O
O
O
Replace the oil filter.
O
O
O
Do a check of the fuel injection pump.
O
Do a check of the fuel injection nozzle.
O
Drain water from the fuel system.
O
To clean the product
CAUTION: Before you clean the product,
attach a plastic bag tightly around the fuel
tank cap. This is to make sure that water
does not go into the venthole in the fuel tank
cap.
• Use running water from a hose or a high-pressure
washer to clean the product.
CAUTION: Do not point the water
directly at the fuel tank cap, electrical
components or the engine.
• Remove grease and oil from the handle.
To do a check of the scrapers
1. Make sure that the scraper blades (A) do not touch
the drums.
A
B
C
2. If it is necessary, adjust the screws (B) until the
clearance (C) is 1.5 mm/0.06 in.
12
1503 - 001 - 12.11.2020
