product safely. Supervisors and operators must read
and understand the Operator’s Manual, and be aware
of:
• the product’s safety instructions.
• the product’s range of applications and limitations.
• how to operate the product and do maintenance.
National legislation can limit the operation of this
product. Find out what legislation is applicable where
you do work before you start using the product.
Local regulations can limit the operation of this product.
Find out what regulations are applicable where you do
work before you start using the product.
Safety
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the operator's manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product and/or the attachment, other
materials or the adjacent area if the
instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
General safety instructions
It is not possible to cover every conceivable situation
you might be exposed to. Always exercise care and use
your common sense. If you get into a situation where
you feel unsafe, stop and seek expert advice. Contact
your dealer, service agent or an experienced user. Do
not attempt any task that you feel unsure of!
WARNING: Never use a product that has
faulty safety equipment! If your product fails
any checks contact your service agent to get
it repaired. The engine should be switched
off, and the stop switch in STOP position.
WARNING: Please read the operator’s
manual carefully and make sure you
understand the instructions before using the
product. It is recommended that first time
operators also obtain practical instruction
before using the product.
WARNING: Keep in mind that it is you, the
operator that is responsible for not exposing
people or their property to accidents or
hazards.
WARNING: The product must be kept clean.
Signs and stickers must be fully legible.
WARNING: The product can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others.
WARNING: Never allow children or other
persons not trained in the use of the product
to use or service it.
WARNING: The product is not intended for
use by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge.
WARNING: Never allow anyone else to use
the product without first ensuring that they
have read and understood the contents of
the operator’s manual.
WARNING: Never use the product if you are
fatigued, while under the influence of alcohol
or drugs, medication or anything that could
affect your vision, alertness, coordination or
judgement.
WARNING: Unauthorized modifications
and/or accessories may lead to serious
injury or death to the user or others. Under
no circumstances may the design of the
product be modified without the permission
of the manufacturer.
WARNING: Do not modify this product or
use it if it appears to have been modified by
others.
WARNING: Never use a product that is
faulty. Carry out the safety checks,
maintenance and service instructions
described in this manual. Some
maintenance and service measures must be
carried out by trained and qualified
specialists. See
Maintenance on page 19
for instructions.
271 - 002 - 12.06.2018
7
Summary of Contents for MS 610
Page 3: ...Product overview MS 610 G 271 002 12 06 2018 3 ...
Page 25: ...Présentation du produit MS 610 G 271 002 12 06 2018 25 ...
Page 49: ...Descripción general MS 610 G 271 002 12 06 2018 49 ...
Page 72: ...Original instructions Instructions d origine Instrucciones originales 1158948 49 2018 06 25 ...
