Type plate
1
2
3
4
5
6
7
8
9
10
11
12
13
1. Husqvarna Identity (HID) with article number, factory
and line, date, sequence number and control number
2. Model name
3. Product number code (PNC)
4. Scannable code
5. Production year
6. Rated power
7. Serial number with production date, year, week and
sequence number
8. Manufacturer and manufacturer address
9. Product number code (PNC)
10. Product weight, unladen
11. Maximum front axle weight (GAWR)
12. Maximum rear axle weight (GAWR)
13. Maximum laden weight (GCWR)
Euro V Emissions
WARNING:
Tampering with the engine
voids the EU type-approval of this product.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Safety
Safety definitions
Warnings, cautions and notes
are used to point out specially
important parts of the manual.
WARNING: Used if there
is a risk of injury or death
for the operator or
bystanders if the
instructions in the
manual are not obeyed.
CAUTION: Used if there
is a risk of damage to the
product, other materials
or the adjacent area if
the instructions in the
manual are not obeyed.
Note: Used to give more
information that is necessary in
a given situation.
General safety instructions
WARNING:
This product
can cut off hands and
feet and throw objects.
Serious injury or death
may occur if you do not
12
1591 - 005 - 20.05.2021
