OPERATING
14 – English
Changing the diamonds
Shut down the machine and disconnect the power plug.
Have a set of gloves ready, as diamond tools can get very
hot.
•
Put the machine into service position.
•
Pull back on handle to lift grinding head off the ground.
•
Lay machine back on the ground.
•
Put on gloves.
•
Use a hammer to remove the diamond segments.
•
Affix new diamond segments on the grinding disc.
•
Once new diamond segments have been attached,
reverse procedure to lower machine to ground.
Transport and storage
•
Secure the equipment during transportation in order
to avoid transport damage and accidents.
•
The machine should be transported under cover
where possible, limiting the exposed to natural
elements – in particular rain and snow.
•
Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
•
The machine should always be stored in a dry place
when not in use.
Transport
The machine can be taken apart and folded to give a
smaller size when transporting.
•
Disconnect the motor cable from the electrical box.
•
Remove the locking pins and then the bolts on each
side.
•
Loosen the grinding head from the wheel chassis.
1
2
Summary of Contents for PG450
Page 75: ......
