Sen‐
sor
field
Function
Comment
1
ON / OFF
To activate and deactivate the hob.
2
Hob²Hood
To activate and deactivate the manual mode
of the function.
3
Pause
To activate and deactivate the function.
4
/
-
To increase or decrease the time.
5
-
To set the timer function.
6
-
Timer display
To show the time in minutes.
7
Bridge
To activate and deactivate the function.
8
-
Control bar
To set a heat setting.
9
PowerBoost
To activate the function.
10
Lock / Child Safety Device To lock / unlock the control panel.
4.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / There is a risk of
burns from residual heat.
The indicators show the level of the
residual heat for the cooking zones you
are currently using. When the hob is
deactivated, the indicators are still
visible. When the hob is cold enough,
they disappear. The indicators may also
come on for the neighbouring cooking
zones even if you are not using them.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and
deactivating
Touch for 1 second to activate or
deactivate the hob.
The control panel comes on after you
activate the hob and goes off after you
deactivate the hob.
When the hob is deactivated you can
only see .
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• you do not place any cookware on the
hob for 50 seconds,
• you do not set the heat setting for 50
seconds after you place the
cookware,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth). When you
hear the acoustic signal, the hob
www.husqvarna-electrolux.se
28
