Husqvarna QSI7134W, User Manual

6.3 

OptiHeat Control (3 step

Residual heat indicator)

WARNING!

 /   /   There is a risk of

burns from residual heat.

The indicators show the level of the

residual heat for the cooking zones you

are currently using. The indicators may

also come on for the neighbouring

cooking zones even if you are not using

them.
The induction cooking zones produce

the heat necessary for the cooking

process directly in the bottom of the

cookware. The glass ceramic is heated by

the heat of the cookware.

6.4 

The heat setting

Turn the knob for the heating functions

to select a heating function. To

deactivate it turn the knob to the off
position  .

6.5 

Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after

you activate the hob,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

• you use incorrect cookware. The

symbol   comes on and the cooking

zone deactivates automatically after 2

minutes.

• you do not deactivate a cooking zone

or change the heat setting. After
some time   comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting

The hob deacti-
vates after

, 1 - 2

6 hours

3 - 4

5 hours

5

4 hours

6 - 9

1.5 hour

6.6 

Using the cooking zones

Put the cookware on the cross / square

which is on the surface that you cook.

Cover the cross / square fully. Induction

cooking zones adapt to the dimension of

the bottom of the cookware

automatically. You can cook with the

large cookware on two cooking zones at

the same time.

6.7 

Automatic Heat Up

If you activate this function you can get a

necessary heat setting faster. The

function sets the highest heat setting for

some time and then decreases to the

correct heat setting.

To activate the function a

cooking zone must be cold.

To activate the function for a cooking

zone:

 turn the knob for a cooking zone

to the A position.   shows on the

display. Immediately set the correct heat

setting.

To deactivate the function:

 turn the

knob to the off position.

6.8 

PowerBoost

This function makes more power

available to the induction cooking zones.

The function can be activated for the

induction cooking zone only for a limited

period of time. After this time the

induction cooking zone automatically

sets back to the highest heat setting.

To activate the function for a cooking
zone:

 touch 

.   comes on.

To deactivate the function:

 change the

heat setting.

ENGLISH

13