Husqvarna QT3581K, User Manual

Problem

Possible cause

Solution

The appliance has no
power. There is no volt-
age in the mains socket.

Connect another electrical
appliance to the mains
socket. Check fuse. Con-
tact a qualified electrician.

No ice.

The ice maker is not
switched on.

Refer to "Ice maker func-
tion".

E1 flashes in the
temperature display

No water supply.

Carry out the necessary
measures on the water
supply. Press any button to
reset the Alarm.

E2 flashes in the
temperature display

The ice channel in the
door is blocked.

Remove the obstacle.
Press any button to reset
the Alarm.

E3 flashes in the
temperature display

The ice maker is defec-
tive.

Contact service.

E5 flashes in the
temperature display

The ice dispenser is de-
fective.

Contact service.

The lamp does not
work.

The lamp is defective.

Refer to "Replacing the
lamp".

The door has been open
to long.

Close the door.

Door interferes with
ventilation grill.

The appliance is not lev-
elled.

Refer to "Levelling".

Misaligned door.

The appliance is not lev-
elled.

Refer to "Levelling".

DEMO appears on
the Display

The appliance is in dem-
onstration mode (DEMO)

Keep pressed approxi-
mately 10 sec the Mode
button since a long sound
of buzzer is heard and the
Display shut off for a short
while: appliance start
works regularly.

As much as the advice does not lead to result, call the nearest brand-mark service.

6.1 

Replacing the lamp

The appliance is equipped with a long-
life LED interior light.
Only service is allowed to replace the
lighting device. Contact your Service
Center .

6.2 

Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer
to "Installation".

3.

If necessary, replace the defective
door gaskets. Contact the Service
Center.

ENGLISH

15