Husqvarna S 36, Operator'S Manual

Data

T 8600 Propane

S 36 Propane

Dimensions (L*W*H), in / mm

55x27x69 / 1400x700x1775

46x27x63 / 1170x693x1590

Gas tank size, max (DxH), in / mm. See Note 2

12.2x23.5 / 310x600

12.2x23.5 / 310x600

Gas amount in tank, max, lbs / kgs. See Note 2

20 / 10

20 / 10

Gas tank weight (incl. gas), max lbs / kgs. See Note 2 50 / 25

50 / 25

Engine fuel

See engine manufacturer manual.

Engine oil

Engine parts

Note 1: As specified by engine manufacturer. The power rating of the engines indicated is the average net power

output (at specified rpm) of a typical production engine for the engine model measured to ISO3046, SAE J1940/

J1995. Mass production engines may differ from this value. Actual power output for the engine installed in the final

product will depend on the operating speed, environmental conditions and other variables.

Note 2: Only use gas tank compliant to DOT specifications. Ask your authorized dealer.

SERVICE

Service

WARNING: Before cleaning and servicing

the product, you must turn it off, disconnect

the battery and propane tank.

CAUTION: Wait until the fan impeller has

completely stopped, then carry out the

service on the product. The exhaust

becomes very hot even if the engine runs for

just a short period of time.

• Avoid cleaning with a high pressure cleaner. If

necessary, do not direct at the openings on the dust

extractor, especially the opening for cooling air.

• Before moving the dust extractor from the work area,

the dust extractor must be cleaned and the inlet

must be locked using the inlet valve.

• All other equipment must be regarded as

contaminated and be treated thereafter.

• If possible, use a special suitable room.
• Proper personal protective equipment must be used.

Dust can be spread when the coarse filter and the

absolute filter are replaced, which can be hazardous

to health. Accordingly, the user should wear

protective glasses, protective gloves, and a

breathing mask conforming to protection class FFP3.

• All contaminated parts after service must be properly

disposed of in plastic bags according to all local

regulations.

• If the product has to be used for other purposes, it is

extremely important that the product is cleaned to

avoid the spread of hazardous dust.

• Do not puncture the HEPA filter to prevent dust

dispersion.

• The correct distance between clutch plates is 0.5

mm (-0.2 + 0.3)

Replacement parts, Filters and Dust collection system

Part no:

Description

T 8600 Propane

S 36 Propane

590429201

Longopac (4-bags)

1

1

590396101

Plastic bags (25-pcs)

1

1

590438801

Pre-filter T 8600 Propane

1

N/A

590430202

Pre-filter S 36 Propane

N/A

1

590429801

HEPA FILTER S-LINE

N/A

2

518 - 003 - 07.06.2018

13