Maintenance schedule T-Line Dust
Extractor
The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
Maintenance
Before each
use
Daily
Weekly
When suc-
tion is low
6 months or
1000h
12 months
or 2000h
Look for signs of wear,
damage or loose connec-
tions of the controls before
the unit is connected.
X
Do a check that the Longo-
pac is correct.
X
Do a check of the filter
cleaning mechanism.
X
Do a check of the dust
hose and the connections.
X
Do a check of the wheels.
Look for damage and bad
connections.
X
Clean the pre-filter.
X
Replace the pre-filter.
X
X
Replace the Hepa filter
X
X
To clean the dust extractor
It is important to clean the dust extractor to prevent
circulation of dangerous dust. Always clean the dust
extractor before it is moved from the work area.
WARNING:
Turn the motor switch to
its OFF position and disconnect the cord
from the wall outlet before you clean or do
maintenance to the product.
• All equipment once used must be regarded as
contaminated and be treated thereafter.
• All parts that are contaminated after service work
must be disposed in a correct procedure in plastic
bags. Refer to local regulations.
• Use correct personal equipment when you clean the
Personal protective equipment on
page 7
.
• Clean the external surface with a moist cloth.
• Clean the filters and the dust extractor in applicable
area.
• Vacuum the pre-filter from the inside. Always use
dust extractors with Hepa filter and a soft brush to
not damage the filter.
• Do not use water on electrical components.
• Do not clean the dust extractor with high pressure
(air or water).
• Do not put tools on the surface of the filter, it can
cause damage to the filter.
• Do not make a hole in the Hepa filter, it can cause a
health risk.
Filter change
WARNING:
Use personal safety
equipment on page 7
, during filter change.
Dust can come out during filter change.
WARNING:
Always turn the motor
switch in the Off position and disconnect the
cord from the wall outlet during filter change.
WARNING:
Be careful, the toggle
fasteners can cause damage to the operator
when assemble the product.
To clean the pre filter
The filter must be cleaned from time to time. This
must be done before changing the plastic bag collection
10
877 - 006 - 03.02.2022
Summary of Contents for T 10000
Page 67: ...877 006 03 02 2022 67 ...
