4
1. Remove (2) Push Pins, Springs, and Bypass Valve from
the Center Case.
(Fig. 9)
Fig. 9, Push Pin and Bypass Valve Removal
Final Pinon Assembly
1. Remove the Final Pinion Assembly from the Upper Case
from its seated position. Separate the assembly, Bear-
ing, Bushing, Washer, Final Pinon Shaft, and Reduction.
(Fig. 10, 11)
2. Inspect the Final Pinion Shaft and the Reduction Gear
for scoring, pitting, discoloration and chipped or broken
teeth.
(Fig. 11
)
Fig. 11, Final Pinion Assembly
Carefully inspect all parts for wear or damage.
Replace as necessary.
Fig 10, Final Pinon Assembly Removal
Bypass Valve Removal
Final Pinion Assembly Removal
