21
S
ET
U
P
LOWER THE FEED TEETH
The
IHHGWHHWKDUHORZHUHGZKHQ\RXPRYHWKHVZLWFKRQWKH
IURQWRI WKHIUHHDUPWRWKHULJKW0RYHWKHVZLWFKWRWKHOHIW
if you wish to raise the feed teeth. The feed teeth will raise
as you begin to sew. The feed teeth should be lowered when
sewing on buttons and for free motion sewing.
CHANGING THE PRESSER FOOT
Press the ON/OFF switch to “O”.
0DNHVXUHWKHQHHGOHLVLQWKHKLJKHVWSRVLWLRQDQGWKH
presser foot is lifted. Pull the presser foot towards you.
2. Line up the cross pin on the foot with the gap in the
presser foot ankle. Push back until the foot snaps into
place.
CHANGING THE NEEDLE
Press the ON/OFF switch to “O”.
1. Loosen the screw in the needle clamp with the
VFUHZGULYHU
5HPRYHWKHQHHGOH
3XVKWKHQHZQHHGOHXSZDUGVZLWKWKHÁDWVLGHDZD\IURP
you until it will go no further.
8VHWKHVFUHZGULYHUWRWLJKWHQWKHVFUHZSURSHUO\
