background image

4

PRODUCT SPECIFICATIONS

Gasoline Capacity 

1.50 Gallons (5,7 L) 

 

and Type: 

Unleaded Regular

Oil Type (API-SG-SL): 

SAE 10W30 (above 32°F/0°C) 

 

SAE 5W-30 (below 32°F/0°C)

Oil Capacity: 

48 oz.

Spark Plug: 

Champion RC12YC 

 

 

Gap:  .030" (.76 mm)   

Ground Speed (MPH): 

Forward: 

1st 

1.2 

 

  

2nd 

1.5 

 

  

3rd 

2.4 

 

  

4th 

3.5 

 

  

5th 

4.8 

 

  

6th 

5.3 

 

                                        Reverse:    

1.5

Charging System:  

3 Amps Battery 

 

 

 

5 Amps Headlights

Battery: AMP/HR: 

28 

 

 

 Min. 

CCA: 

230 

 

 

 Case 

Size: 

U1R

Blade Torque: 

45-55 FT. LBS.

CONGRATULATIONS

  on your purchase of a new tractor.  

It has been designed, engineered and manu fac tured to give 

you the best possible dependability and performance.
Should you experience any problem you cannot easily rem-

edy, please contact your nearest authorized service center/

department.  We have com pe tent, well-trained tech ni cians 

and the proper tools to ser vice or repair this tractor.
Please read and retain this manual.  The instructions will 

enable you to assemble and maintain your tractor prop erly.  

Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

•  Read and observe the safety rules.
•  Follow a regular schedule in maintaining, caring for 

and using your tractor.

• 

Follow the instructions under “Maintenance” and “Stor-

 age” sec tions of this own er’s manual.

SAFETY RULES ......................................................... 2-3

PRODUCT SPECIFICATIONS ....................................... 4

CUSTOMER RESPONSIBILITIES ................................. 4

ASSEMBLY ................................................................. 6-8

OPERATION ............................................................. 9-14

MAINTENANCE SCHEDULE ...................................... 15

MAINTENANCE .....................................................   15-18

SERVICE AND AD JUST MENTS ............................ 19-24

STORAGE .................................................................... 25

TROU BLE SHOOT ING ............................................ 26-27

REPAIR PARTS ...................................................... 28-42

TABLE OF CONTENTS

WARNING:  

This tractor is equipped with an internal com-

 bus tion engine and should not be used on or near any 

un im proved forest-covered, brush-covered or grass-cov ered 

land unless the en gine's exhaust system is equipped with 

a spark arrester meeting ap pli ca ble local or state laws (if 

any).  If a spark arrester is used, it should be maintained 

in effective working order by the operator.
In the state of California the above is required by law 

(Section 4442 of the California Public Resources Code).  

Other states may have similar laws.  Federal laws apply 

on federal lands. 

Summary of Contents for YT16542















































Reviews: