manualshive.com logo in svg

Husqvarna YTH2242 TF, Owner'S Manual

The Husqvarna YTH2242 TF is a reliable and powerful lawn tractor designed to make mowing a breeze. To fully understand the machine's capabilities and maintenance requirements, make sure to download the free Owner's Manual from 88.208.23.73:8080. This manual provides detailed instructions and insights to ensure optimal performance.

Share
Download
background image

43

REPAIR PARTS

TRACTOR - MODEL NO. YTH2242 (YTH2242A), PRODUCT NO. 954 57 03-83

MOWER DECK

1         532 17 69-22    Mower Deck Assembly, 42”
2         872 14 05-06    Bolt
3         532 13 80-17    Bracket Assembly,Sway Bar, Front
4         532 16 54-60    Bracket Sway Bar 42” Deck
5         532 12 46-70    Retainer Spring
6         532 17 80-24    Bar Sway Deck
8         532 85 08-57    Bolt, Hex  3/8-24 x 1.25 Gr. 8
9         810 03 06-00    Washer, Lock
10       532 14 02-96    Washer, Hardened

                                   (The following blades are available)

11       532 13 41-49    Blade, Mulching 42" Std (For mulch-

ing mowers only)

- -       532 13 97-75    Blade Mulching 42" Premium (For 

better wear when mulching)

- -       532 13 89-71    Blade Mower 42" Hi-Lift (For bag-

ging and discharging) 

13       532 13 76-45    Shaft Assembly, Mandrel, Vented
14       532 12 87-74    Housing, Mandrel, Vented
15       532 11 04-85    Bearing, Ball, Mandrel
16       532 17 44-93    Stripper
18       872 14 05-05    Bolt, Carriage  5/16-18 x 5/8
19       532 13 28-27    Bolt, Shoulder
20       532 15 97-70    Baffl e, Vortex
21       873 68 05-00    Nut Crownlock 5/16-18 UNC
22       532 13 47-53    Stiffener Bracket
23       532 17 75-63    Bracket, Defl ector
24       532 10 53-04    Cap, Sleeve
25       532 12 37-13    Spring, Torsion, Defl ector
26       532 11 04-52    Nut, Push
27       532 17 18-59    Shield, Defl ector
28       819 11 10-16    Washer  11/32 x 5/8 x 16 Ga. 
29       532 13 14-91    Rod, Hinge
30       532 17 39-84    Screw Thdrol Hex
31       532 12 99-63    Washer, Spacer
32       532 17 34-36    Pulley, Mandrel
33       532 17 83-42    Nut, Toplock, Flanged
34       872 11 06-4      Bolt
36       532 17 34-38    Pulley, Idler, Flat
37       819 13 13-16    Washer  13/32 x 13/16 x 16 Gauge 
40       873 68 06-00    Nut Crownlock 3/8-16 UNC
44       532 14 00-88    Guard, Mandrel, L.H.
45       532 12 47-88    Retainer
46       532 13 77-29    Screw, Thd. Roll  1/4-20 x 5/8

54       532 17 85-15    Washer, Hardened
55       532 15 50-46    Arm, Idler
56       532 12 20-52    Spacer, Retainer
59       532 17 34-42    Guard, TUV Idler
61       532 17 48-82    Spring Ext Elect Clutch 42” Dck
68       532 17 48-83    V-Belt
91       532 18 05-32    Bracket Asm Noseroller Lh
92       873 80 05-00    Nut Lock Hex 5/16-18
94       532 13 22-64    Roller Nose 38"-50"
95       532 18 05-33    Bracket Asm Noseroller Rh
101     532 13 64-20    Mulcher Cover
102     871 08 10-10    Screw
103     819 06 12-16    Washer  #10
104     810 07 10-00    Washer, Lock
105     532 16 07-93    Latch Assembly, Bagger
106     532 12 50-04    Nut, Weld
111     532 18 13-92    Bracket Wheel Guage LH
112     532 18 13-93    Bracket wheel Guage RH
113     817 06 05-10    Screw  5/16-18 x 5/8 Tap R
114     873 51 05-00    Nut Keps 5/16-18
116     532 12 48-42    Bolt, Shoulder
117     532 16 57-46    Wheel, Gauge
118     873 93 06-00    Nut, Centerlock 3/8-16
119     819 12 14-14    Washer 3/8 x 7/8 x 14 Gauge
129     819 13 13-12    Washer 13/32 x 13/16 x Ga.
130     874 78 06-16    Bolt Fin Hex 3/8-16unc x 1 Gr.5
131     872 14 06-08    Bolt Rdhd Sqnk 3/8-16unc x 1
132     817 00 06-12    Screw 3/8-16 x .75
143     532 15 71-09    Bracket Arm Idler 42”
144     532 17 34-41    Keeper Belt 42” Clutch Cable
145     532 17 34-37    Pulley Idler Flat
146     532 17 34-43    Bolt Carriage Idler
148     532 16 90-22    Spring Return Idler
149     532 16 58-98    Retainer Spring Yellow Zinc
150     819 09 12-16    Washer  9/32 x 3/4 x 16 Ga.
159     872 14 06-14    Bolt Rdhd Sqn 3/8-16 UNC x 1- 3/4
182     532 17 91-26    Rod Roller Nose
183     532 16 35-52    Retainer Spring
184     819 13 14-10    Washer 13/32 x 7/8 x 10 Ga.
- -       532 13 07-94    Mandrel Assembly (Includes Hous-

ing, Shaft and Shaft Hardware Only 

KEY    PART                
NO.     NO.                   DESCRIPTION

KEY    PART                
NO.     NO.                   DESCRIPTION

NOTE:

 

 

All component dimensions given in U.S. inche

             1 inch = 25.4 mm

Summary of Contents for YTH2242 TF

















































Reviews:

No comments

Related manuals for YTH2242 TF

Yard Machines 1995 Illustrated Parts List preview
1995
Brand: Yard Machines Pages: 12
EGO AB4201D Operator'S Manual preview
AB4201D
Brand: EGO Pages: 2
Exmark Cd42cd, Cd48cd Setup Instructions preview
Cd42cd, Cd48cd
Brand: Exmark Pages: 4
Peco 35621205-06 Owner'S Manual preview
35621205-06
Brand: Peco Pages: 12
Elem Garden Technic TDTAC46HP5T-C User Manual preview
TDTAC46HP5T-C
Brand: Elem Garden Technic Pages: 32
Swisher WBERC11524 Owner'S Manual preview
WBERC11524
Brand: Swisher Pages: 16
IDS Opera Duo User Manual preview
Opera Duo
Brand: IDS Pages: 34
Alamo 7191852C Operator'S Manual preview
7191852C
Brand: Alamo Pages: 110
Craftsman 917.270613 Owner'S Manual preview
917.270613
Brand: Craftsman Pages: 60
Craftsman 917.270533 Owner'S Manual preview
917.270533
Brand: Craftsman Pages: 56
Craftsman 917.258694 Owner'S Manual preview
917.258694
Brand: Craftsman Pages: 60
Craftsman 917.258680 Owner'S Manual preview
917.258680
Brand: Craftsman Pages: 240
Craftsman 917.258591 Owner'S Manual preview
917.258591
Brand: Craftsman Pages: 60
Craftsman 917.258552 Owner'S Manual preview
917.258552
Brand: Craftsman Pages: 56
Craftsman 917.258911 Owner'S Manual preview
917.258911
Brand: Craftsman Pages: 60
Craftsman 917.258900 Owner'S Manual preview
917.258900
Brand: Craftsman Pages: 60
Craftsman 917.259170 Owner'S Manual preview
917.259170
Brand: Craftsman Pages: 60
Craftsman 917.258693 Owner'S Manual preview
917.258693
Brand: Craftsman Pages: 60

Brands by name

Popular brands

Load more brands