MAXAM1 Owner's and Maintenance Manual (Rev. 4 / 2015)
© Copyright 2015 Hussey Seating Company
Prior to operating your new MAXAM1 seating unit, please
read and understand the operating and maintenance
instructions in this Owner's Manual.
2.0 MAXAM1 Operating Instructions (Cont.)
MAXAM 1 units may be abutted end-to-end only on flat and level surfaces (Figure 1), such that tripping hazards will
not be introduced at the edges of decks which are not in the same plane. The maximum distance between abutting
units shall not exceed 1”.
A maximum of 4 MAXAM1 Portable Seating units may be abutted adjacent to each other, for a total run of 4 units or
20 seats.
The distance between the ends of units not abutted end-to-end shall not be less than 4’-0” (Figure 2). This preserves
code-required aisle width where egress must be between units, and discourages potentially injurious jumping the gap
between adjacent units.
Figure 3
Figure 4
Store the units in a controlled location to discourage unauthorized access to them.
It is recommended to store the unit along a wall with the Courtside seats exposed as shown in Figure 3, and not
with the understructure exposed as shown in Figure 4. The units should be stored in a controlled location so as to
discourage unauthorized access to them.
Figure 1
Figure 2
