Instruction manual
Hanging cradle
©Hussh-cradles Page 1
IMPORTANT: PLEASE KEEP FOR FUTURE REFERENCE. READ THE
INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE CRADLE!
Here it is: your very own Hussh hanging cradle. There’s quite a chance
you’re going to be rather pleased with this
absolute dream
of a baby’s
bed. Because it’s a little different from the others, made with particularly
personal care and so very, very comfy.
The cradle is ‘handmade’ by Dutch hands. This makes each cradle truly
unique. Small imperfections and deviations demonstrate the individuality
of each product. However, should the cradle not live up to your
expectations, do not hesitate to let us know!
Before assembling the hanging cradle, please check if you have all
the parts listed below.
Hanging cradle items
:
1 cotton cradle
1 mattress with integrated bottom board
2 long rods
2 short rods
1 spring including 1 safety line
4 suspension ropes
1 hardware set: 4 carbine harnesses (6
cm long), 4 carriage bolts, 4 eye nuts,
4 ‘adjusting eights’.
Swinging hook set
(optional order): 1 swinging hook + plug
Heavenly canopy items
(accessory):1 canopy with 1 carbine harness
Warning!
Read the product conditions prior to use on www.hussh-cradles.com
Use of the spring: the spring must be used under normal conditions. The
manufacturer understands ‘normal’
not
to include
turning/twisting
or a
sudden offload (discharge) of the spring. Consequently, children should
never be allowed to play with the cradle and/or the spring.
Always
use
the spring with the attached
safety line.
Hoe to suspend the hanging cradle from the ceiling
The hanging cradle is suspended from a swinging hook in the ceiling. This
hook can be screwed directly into a wooden beam (after predrilling). If
you have a concrete ceiling, use the plug. Test the safety of your
construction and make sure the hook can hold quite its share of weight!
Note
: when screwing in the hook
do
not
use
much
force
as this can
weaken the hook.
Summary of Contents for Hanging
Page 3: ......
