22
Electrical
Field Wiring and Serial Plate Amperage
Field Wiring must be sized for component amperes printed
on the serial plate. Actual ampere draw may be less
than specified. Field wiring from the refrigeration control
panel to the merchandisers is required for refrigeration
thermostats. Case amperes are listed on the wiring
diagram, but always check the serial plate.
BEFORE SERVICING
ALWAYS DISCONNECT ELECTRICAL
POWER AT THE MAIN DISCONNECT
WHEN SERVICING OR REPLACING ANY
ELECTRICAL COMPONENT.
This includes (but not limited to) Fans, Heaters
Thermostats, and Lights.
CASE MUST BE GROUNDED
NOTE: Refer to label affixed to case to determine the actual
configuration as checked in the “TYPE INSTALLED” boxes.
Standard lighting for all refrigerated models will be full length
LED Lights located within the case at the top.
Wiring Diagrams Index
Model
Tier
Description
Size
Diagram #
Entyce
TY 1
Examples
6X8I-R
8'
3008179
6X12I-R
12'
3014692
TY 3
Examples
4X4E-R
4'
1H96214
4X6E-R
6'
1H85148
4X6I-R
6'
1H85155
4X8I-R
8'
1H91354
4X12I-R
12'
3008178
5X9I-R
9'
2H00213
6X8C-R
8'
3013478
6X8E-R
8'
1H87790
6X18I-R
18'
3013482
TY 4
Examples
6X12E-R
12'
3016190
4X6E-S
6'
3042642
4X8I-R
8’
1H86613
4X8I-S
8'
3046094
4X10I-R
10'
3013474
6X8E-R
8'
3013477