9
Leveling
A LEVEL CASE IS NECESSARY TO INSURE PROPER
OPERATION AND WATER DRAINAGE.
Note: A. To avoid
removing concrete flooring, begin lineup leveling from the highest
point of the store floor.
Installation
Location
The refrigerated merchandisers have been designed for
use only in air conditioned stores where temperature and
humidity are maintained at or 75°F and 55% relative humidity
or below 80°F and 55% relative humidity. DO NOT allow air
conditioning, electric fans, ovens, open doors or windows
(etc.) to create air currents around the merchandiser, as this
will impair its correct operation.
Uncrating the Stand
Place the fixture as close to its permanent position as
possible. Detach the walls from each other and remove from
the skid. Unstrap the case from the skid. The fixture can now
be lifted off the crate skid.
Lift only at base of stand!
Exterior Loading
These models have not been structurally designed to support
excessive external loading.
Do not walk on their tops;
This could cause serious personal injury and damage to
the fixture.
It is the contractor’s responsibility to install
case(s) according to local construction and
health codes.
