10 of 10
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
C2XEC-E
Technical Data Sheet
Impact
Excel
C2XEC-E
Dairy/Delicatessen
Precut & Packaged Produce
Foil-covered
Anti-sweat
Heater
Canopy
Canopy
Anti-Sweat Heater Wires
with Purple Markers
Electrical Wireway
Remove Screws
Light Channel
Light Channel
Hinge
Ballast
Light
Channel
The ballast for the canopy and shelf lamps is
located behind the canopy on the left-hand end
(when facing case) of the merchandiser.
To access the ballast:
1. Remove screws at bottom edge of canopy and
rear of light channel.
2. Lower light channel which will pivot on hinge.
3. Service or replace ballasts as required.
4. Reassemble items as they were originally
installed.
NOTE
: Rail lamp ballast is located in the
electrical raceway.
CANOPY ANTI-SWEAT HEATER
The canopy anti-sweat heater location is shown
below. Connections are in the electrical wireway.
