HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)
11
P/N 0430502
Adding Trim to the
Joint and Front Glass
18
While the silicone is still wet,
insert the
Interior and
Exterior Trim (Items – 23
and 24)
into the silicone that
was applied in Step 17.
Apply tape over the trims to
hold them in place as the
silicone dries for 24 hours.
See Figure 12,
Details M, N and O for
this procedure.
Figure 12. Sealing and adding trim to the Front Joint of Case
Gasket
Exterior
Trim
Interior
Trim (Shorter)
Silicone
Silicone
Glass
Glass
Tape
Tape
CASE 1
CASE 1
CASE 2
CASE 2
Detail M.
Detail N.
Detail O.
Add silicone to both interior and
exterior of glass next to the gasket
Note: Cases are shown apart for
clarity of trim and location
Push trim into silicone
Cover trim with tape
24
4
4
2
23
Vertical Glass Service Merchandisers Joining Instruction