6
®
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)
Figure 6. Leveling Merchandisers
9
Move the second merchandiser
into position against the first.
Match the alignment pins
with the corresponding holes.
See Figure 6, Details H and I.
10
The complete lineup must
be leveled to the highest
point of the floor. After the
first merchandiser has been
set, position the second so
the end frames touch.
A.
Set a long level (4 foot or
more) on the upper front panel
of the merchandisers. Adjust
case height by rotating the
Adjustable Leg Leveler
until
the merchandisers are flush
and level.
See Figure 6, Detail J.
B.
Also check each joint area
to be sure that the panels of
adjoining merchandisers are
flush to each other.
Levels on Upper
Front Panel
M
INIMUM
H
EIGHT
M
AXIMUM
H
EIGHT
Adjustable
Leg Leveler
Lower
Raise
Alignment Pins
DETAIL I.
DETAIL J.
Levels on Upper
Front Panel
P/N 0430502
CASE 1
CASE 2
DETAIL H.
Top
Alignment
Pin
