Low Temperature
Excel
P/N 0467434_P
1-5
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Leveling Narrow, Intermediate, Wide Island or
End Merchandisers
Position the first merchandiser at the highest
point. Set a long level (4 ft [1220 mm] or more)
on top of the discharge air flue. Insert shims
until the merchandiser is level from end to end
and from front to back. Check all 6 legs on 8 ft
(2438 mm) merchandisers, or 8 legs on 12 ft
(3658 mm) merchandisers.
NOTE:
To avoid removing concrete flooring,
begin lineup leveling from the highest point of
the store floor.
JOINING INSTRUCTIONS
Sectional construction means that two or more
merchandisers may be joined in line yielding
one long continuous display requiring only one
pair of ends.
a
ll
joints
must
be
airtight
to
prevent
formation
of
iCe
or
Condensation
.
Prep Merchandiser
1. Check to be sure that merchandisers are
level. Locate Joining Kit and check contents.
2. Remove wire racks and display pan. Before
removing interior front and back panels,
Insert Shim
Leveling
F / FG
NOTE:
Do not place levels on Display Pans or
on Racks.
(FW Shown)
