6-14
s
eRVIce
P/N 0467434_P
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
REPLACING RETURN THERMOPANE
GLASS ASSEMBLY
Requires TWO (2) people.
Always use gloves when handling glass.
1. Turn off power to merchandiser.
2. Remove hand rail.
3. Disconnect glass pane heater lead wires
from the wiring junctions.
4. With one person standing at each end
of the glass, lift the thermopane glass
assembly straight up to remove it from its
retainer channel and end posts.
5. To install glass, have one person hold each
end of the thermopane glass assembly and
carefully lower it into the retainer channel
and end-posts.
Note: It may be necessary to use a wide thin
tool (such as a putty knife) to keep trim
from obstructing glass positioning. Refer to
illustration on page 6-6.
6. Reconnect glass pane heater lead wires.
7. Replace hand rail.
8. Turn on power. Verify the heater is
working properly.
— LOCK OUT / TAG OUT —
To avoid serious injury or death from electrical
shock, always disconnect the electrical power
at the main disconnect when servicing or
replacing any electrical component. This
includes, but is not limited to, such items as
doors, lights, fans, heaters, and thermostats.
