11
Fault code display
Fault in controller
E1
Disconnected case sensor
E2
Short -circuited case sensor
E3
WARRANTY AND PARTS INFORMATION
IMPORTANT –
Please read carefully to assure prompt and accurate service.
ORDERING PARTS REPLACEMENT –
Contact your nearest Hussmann Distributor.
Always specify model and serial number of cabinet.
If correct part number is not know, give a clear description of part itself and its function in
the cabinet or remote unit.
Same as first three items in Ordering Replacement Parts Procedure.
Give original installation date of cabinet and, if possible, forward a copy of the original
invoice or delivery receipt.
All s hipments of in-warranty replacement parts will be invoiced from the factory until such
time as the defective part is returned and proved to be defective by our Quality Control
Department.
Contact your Hussmann Distributor for instructions on returning in-warranty parts.
Warranty parts must be returned to the factory within 30 days of date of failure to assure
proper disposition.
Lack of any of the above information may result in the shipment of the wrong part, or a
delay in shipment.
COMPRESSOR REPLACEMENT PROCEDURE –
Replacement compressors will not be shipped from the Hussmann factory. They may be
obtained from you nearest Copeland Wholesaler.
Your wholesaler will replace, free of charge, any compressor found to be defective within
twelve months of installation, not to exceed twenty months from the date of manufacture –
as determined by the compressor serial number on the compressor serial plate.
