25mm
25mm
25mm
25mm
25mm
100mm
Check underside of
case
PAGE 7
MPD GLASS DOOR MULTIDECK - HUSSMANN
NOTE:
Check underside of
case
before lifting to ensure no damage to
electrical, drain box or other extrusions
occurs.
NO OBJECTS ON CASE:
Do not
place objects, stack or use the top of
the case as storage. Object may fall
and cause injury to personnel and /or
damage to the case.
AIR FLOW:
Sources of heat or air
flow external to the
cabinet should be
avoided. i.e ventilation
ducts, open doors and
direct sunlight. This will
deter external air from
disrupting the air flow
from the cabinet thus
will help to maintain its
performance.
LOCATION:
The refrigeration case should be positioned in a manner
that optimal air flow can flow through the underside
and rear. This will minimise the risk of condensation on
the back and/or underside. Leave
100mm
gap between
the rear of the case and the back wall.
STOCKING SHELVES:
When stocking the shelves, be sure to leave a
25mm
gap in between the stock and shelf to ensure even and
consistant airflow. Not doing this correctly may result
in a blockage of airflow which could freeze the stock at
the rear, and not enough refrigeration being produced
toward the front of the case.
1.6
CASE VENTILATION:
FIGURE 1B
FIGURE 1A
FIGURE 1C
GENERAL INFORMATION
Summary of Contents for MPD116
Page 45: ......
