1-4
I
nstallatIon
P/N 0515388_L
U.S. & Canada 1-800-922-1919 • Mexico 01-800-890-2900 • www.hussmann.com
Level the merchandiser by all four corners.
Start at the rear by placing the provided shims
as needed under each end of the rear base rail.
The shims are long enough to allow adjoin-
ing merchandisers to be leveled with the same
shim.
When the rear of the case is level end-to-
end, move to the front of the case.
Use shims as
needed at each front corner so that the front is
also level from end-to-end and front-to-rear.
The merchandiser should be solidly supported
at least every 4 feet (1220 mm). Once the
merchandiser is level, if any gaps are present
under the base rail, shims should be inserted
approximately in line with the center front
support legs to support the rear of the case.
At the front of the case, insert shims under
each of the center legs so that they support the
front of the merchandiser.
NOTE:
Do not place levels
on Display Pans or
on Shelves.
Level on
Hand Rail
Insert Shim(s)
Shims
Levels
