P/N 0446551_A
4-1
Island & Multi-deck Island
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
START UP
See the display case's Technical Data Sheet for
refrigerant settings and defrost requirements.
Bring cases down to the operating temperatures
listed on the technical data sheet.
STOCKING
Hussmann display cases are not designed to "heat
up" or "cool down" product—but rather to main-
tain product temperature for maximum shelf life.
Product should NOT be placed in case until case
is at proper operating temperature. Allow case to
operate a minimum of 6 hours before stocking
with any product.
Proper rotation of product during stocking is
necessary to prevent product loss. Always bring
the oldest product to the front and set the newest
to the back.
Improper temperature and lighting will adversely
affect food products. Discoloration, dehydration,
and spoilage can be controlled with proper use of
the equipment and handling of product. Avoid
supplemental flood or spot lighting. Factory
supplied display lamp intensity is designed for
maximum visibility and product life. The use of
higher output fluorescent lamps (H.O. and
V.H.O.) will shorten the shelf life of the product.
From the time the product is received, through
storage, preparation and display, the temperature
of the product must be controlled to maximize
life of the product. Keep air in and around the
case area clean.
A
IR DISCHARGE AND RETURN FLUES MUST REMAIN
OPEN AND FREE OF OBSTRUCTION AT ALL TIMES
to provide proper refrigeration and air curtain
performance. Do not allow product, packages,
signs, etc. to block these grilles. Do not use
non-approved shelving, baskets, display racks,
or any accessory that could hamper air curtain
performance.
LOAD LIMITS
Each merchandiser has a load limit decal. Shelf
life of perishables will be short if load limit is
violated.
A
T NO TIME SHOULD MERCHANDISERS BE
STOCKED BEYOND THE LOAD LIMITS INDICATED
.
START UP / OPERATION
Standard
Plexiglass
Optional
High Plex
Package Guard
Glass Front
Return Air Path
(keep clear)
Package Guard
Glass Front
Return Air Path
(keep clear)
LOAD LIMIT
