IGSB-SGB-0307
4
LOCATION
Like other open merchandisers, these are sensitive to air
disturbances. Air currents passing around merchandisers
will seriously impair their operation. Do NOT allow air
conditioning, electric fans, open doors or windows, etc.
to create air currents around the merchandisers.
SHIPPING BRACES
(NOT ALL MERCHANDISERS)
Move the fixture as close as possible to its permanent
location and then remove all packaging. Check for
damage before discarding packaging. Remove all sepa-
rately packed accessories such as kits and shelves.
WARNING
Do NOT remove shipping braces until the merchandis-
ers are properly anchored to the floor. Merchandisers
are top heavy and could tip over causing serious injury.
Merchandisers must be braced before removing the lag
bolts.
Bag Rack Shipping Brace
On non-refrigerated cases, the shipping braces in the
middle should be removed. Its purpose is to protect the
bag rack during shipment.
LEVELING
Merchandisers must be installed level to ensure proper
operation of the refrigeration system and to ensure
proper drainage of defrost water. Place prybar under
metal base and lift. DO NOT LIFT END PANEL. Turn
leveler, with supplied wrench, (one wrench per order)
clockwise to raise, counter clockwise to lower. Repeat
process with other levelers until case is level.
NOTE: To avoid removing concrete flooring, begin
lineup leveling from the highest point of the store.
INSTALLATION
JOINING
Merchandisers are of sectional construction which
means that two or more may be joined in line yielding
one long continuous display requiring only one pair of
ends. Joint kits and instructions are shipped separately.
BRACES
EXTERIOR LOADING
Do NOT walk on top of merchandiser or damage to
the merchandiser and serious personal injury could
occur. They are not structurally designed to sup-
port excessive external loading such as the weight
of a person.
