P/N 0515258_N
1-3
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
SHM Merchandisers
MODEL DESCRIPTION
SHM merchandisers offer versatility for the
display of food items such as: fresh fruit,
vegetables, cheeses and other delicatessen
items. Carefully read and follow the instruc-
tions prior to operating the merchandiser.
UNLOADING
Unloading from Trailer:
Lever Bar (also known as a Mule, Johnson
Bar, J-bar, Lever Dolly, or Pry Lever)
Move the merchandiser as close as possible to
its permanent location and remove all packaging.
Check for damage before discarding packaging.
Remove all separately packed accessories such
as kits and shelves.
Improper handling may cause damage to the
merchandiser when unloading. To avoid dam-
age:
1. Do not drag the merchandiser out of the
trailer. Use a Johnson bar (mule).
2. Use a forklift or dolly to remove the
merchandiser from the trailer.
EXTERIOR LOADING
Do NOT walk on top of merchandisers
or
damage to the merchandisers and serious
personal injury could occur.
merchandisers
are
not
structurally
designed
to
support
excessive
external
loading
such as the weight of a person. Do
not place heavy objects on the merchandiser.
SHIPPING SKID
Each merchandiser is shipped on a skid to
protect the merchandiser’s base, and to make
positioning the case easier.
Do not remove the shipping skid until the
merchandiser is near its final location.
The
skid provides protection for both the merchan-
diser and the floor.
Remove the skid by raising one end of the
merchandiser approximately 6 inches. Block the
merchandiser securely, and remove the two skid
bolts from the raised end. Replace the bolts
with (provided) leg levelers. Repeat this proce-
dure at opposing end. Once the leg levelers are
secured in place, the merchandiser may be slid
off the skid and placed in its final location.
DO NOT TILT MERCHANDISER ON ITS
SIDE OR END WHEN REMOVING SKID.
Once the skid is removed, the merchandiser
must be lifted —NOT PUSHED— to reposition.
Check floor where merchandisers are to be set
to see if it is a level area. Determine the highest
part of the floor.
Do NOT remove shipping crate until the
merchandiser is positioned
for installation.
Do NOT stand or walk on top of
merchandiser. Do not store items or
flammable materials atop the unit.
