background image

 

R

SM SERIES 

Spot 

HUSSMANN – 

CORPORATION 

Monterrey Mexico 

LIMITED WARRANTY 

This warranty is made to the original purchaser-user and is NOT TRANSFERABLE. 
 
WARRANTIES: 
 
FIRST YEAR: 
Hussmann Corporation warrants new Hussmann equipment and all parts thereof to be free from defects in material and workmanship at the time of
purchase. 
Hussmann’s obligation under this warranty shall be limited to repairing or exchanging, at its option, any part or parts, without change F.O.B. factory or
nearest authorized parts depot, which may prove defective within one year from date of original installation (not to exceed fifteen (15) months from
date of shipment from the factory), and wich is proven to the satisfaction of Hussmann to be thus defective. 
 
ADITIONAL FOUR YEARS: 
Hussmann agrees to repair or replace at its option, Hussmann equipment determined through its inspection to have an inherent foam insulation failure
or refrigerant leak within such insulation area for period of live (5) years from date of factory shipment. In addition, Hussmann agrees to repair or
exchange, at its option, the original Motor Compressor Unit only with a compressor of like or of similar desing and capacity if it is shown to the
satisfaction of Hussmann that the Motor Compressor is inoperative due defects in factory workmanship or material under normal use and service as
outlined in Hussmann’s “Installation Instructions” which are shipped inside new Hussmann equipment. Hussmann’s sole obligation under this warranty
shall be limited to a period not to exceed five (5) years from date of factory shipment. The term “Motor Compressor Unit” does not include electric
controls; such as relays, capacitors, pressure controls, or fan motor assembly, condenser, receiver, etc. The warranty does not include any equipment
to wich the Motor Compressor Unit is connected such as cooling coils, temperature controls, refrigerant metering devices, etc. 
 
The warranties to repair or replace above recited, are the only warranties, expressed, implied, or statutory, made by Hussmann with respect to
Hussmann equipment. Hussmann makes no express or implied warranties as to merchantability or fitness for a particular purpose or use. Hussmann
neither assumes, not authorizes any person to assume for it, any other obligation or liability on connection with the sale of said equipment or any part
thereof. 
 
EXCLUSIONS: 
 
1. There is NO warranty against breakage of glass. 
2. THIS WARRANTY SHALL NOT APPLY TO LOSS OF FOOD OR CONTENTS OF THIS EQUIPMENT DUE TO FAILURE FOR ANY REASON. 
3. Hussmann Corporation SHALL NOT BE LIABLE: 
 
A) For any repairs or replacements made by buyer without the written consent of Hussmann or when equipment is installed or operated in a manner
contrary to the printed instructions covering installation and service wich accompanied. 
B) For any damage, delays, or losses, direct or consequential, caused by defects, nor for damage caused by shortages or reduced supply of material,
fire, flood, strikes, acts of God, or circumstances beyond its control. 
C) When the failure or defect of the equipment or of any part or parts is incident to ordinary wear, accident (including accident occurring in transit),
abuse or misuse; or when the serial number of the equipment has been removed, defaced, altered, or tampered with. 
D) When this equipment is operated on low or improper voltage, or is put to a use other than normally recommended by Hussmann, such as remoting
self-contained equipment. 
E) Toward payment of any removal or installation charges of warranted parts and equipment or for transportation charges in connection therewith. 

Hussmann Corporation

 

Summary of Contents for SM









Reviews: