12
IMPORTANT! IT IS IMPERATIVE THAT CASES BE
LEVELED FROM FRONT TO BACK AND SIDE TO SIDE
PRIOR TO JOINING. A LEVEL CASE IS NECESSARY TO
INSURE PROPER OPERATION.
ALL CASES WERE LEVELED AND JOINED PRIOR TO
SHIPMENT, TO INSURE THE CLOSEST POSSIBLE FIT
WHEN CASES ARE JOINED IN THE FIELD.
TO AVOID REMOVING CONCRETE FLOORING, BEGIN
LINEUP LEVELING FROM THE HIGHEST POINT OF
THE STORE FLOOR.
WARNING
CASE MUST BE GROUNDED
BEFORE SERVICING
ALWAYS DISCONNECT ELECTRICAL
POWER AT THE MAIN DISCONNECT
WHEN SERVICING OR REPLACING ANY
ELECTRICAL COMPONENT.
This includes (but not limited to) Heaters and Lights.
DANGER
Electrical Circuit Identification
Standard lighting for all models will be full length fluorescent
lamps located within the case. The switch controlling the lights
is located at the top right of the case.
Electrical
Wiring Diagram Index
Case
Description
Length
Wiring #
Entyce
TY3-4X4E-H
4’
W6600136
TY3-4X5E-H
5’
W6600103
TY2-4X4I-H
4’
W6600188
